Powder Coated Bent Metal Pitch Mark Repair Tool

Powder Coated Bent Metal Pitch Mark Repair Tool - Engraved 1 Side

PLEASE NOTE THE SHAPE AND OUTLINE OF THE PITCH MARK TOOLS SHOWN IN THE IMAGES MAY NOT BE THE SAME AS THOSE SUPPLIED. THE IMAGES ARE ONLY PROVIDED TO SHOW THE COLOURS AND FINISH OF THE POWDER COATING AND ENGRAVING.

If you would like a bent metal pitch mark repair tool that you can powder coat to get the colour of your choice and then be engraved then we offer a wide range of options and shown in the RAL colour chart. Please note the prices shown are for our stock colours but we can quote for any powder coating colour so please get in touch with the RAL colour and the quantity. There is a minimum order of 200 pieces per order. Pitch mark tool Dimensions may vary but roughly they are 74mm x 16mm x 2mm.

Of special interest is the RAL9005 matt black textured finish which has a very tactile finish a bit like sand paper and is pleasing to hold especially in the wet weather.

Lead time is typically 3 to 4 weeks from your order payment being received and subject to stock

We are able to engrave both white and black text onto the powder coated tool in order to colour contrast better.

You can choose to personalise these quality plain stainless steel pitch mark tools using engraving onto 1 side to put your text or logo onto the pitch tool. Stainless steel provides a better quality base metal than cheaper steels and as a result the engraving tends to be sharper and of course will not rust which is a down side of mild steel. Stainless steel also looks better than many of the cheaper plated pitch fork repair tools and over time and with use the plating tends to discolour and flake off.

You can either upload your vector file logo or have 1 or 2 lines of text and you must also state the text font you require. Try to keep the number of characters as mimimal as possible as the more text the smaller they will need to be to fit on the tool. As a guide please try not to exceed 18 characters including spaces per line.

To enable us to engrave your logo to the best possible standard we require that you provide a file format in either eps or .ai as these vector file formats enable the best result. If you do not have these file formats we can re draw your logo and create them. Please select the image re draw option if you need us to do this. Outside dimensions of the stainless steel pitch mark tool are 74mm x 16mm x 2mm. Unless otherwise agreed we will engrave on the face as shown in the image which shows forks pointing upwards towards you and towards 9 o clock with text reading towards 3 o clock. We will provide artwork for your approval prior to engraving and lead time is typically 2 to 4 weeks from artwork approval and payment which we require with order and subject to stock.

Shopping Cart

Powder Coated Repair Tool - Engraved (Excludes Universal Cover)

Available Options

Write a review

Information

Customer Service

Extras

Account